Seismic Loads

Seismic Loads

StonePly offers lightweight, strong, flexible and safe stone cladding. Read how our panels are able to flex with the structure in a seismic event here.

Overview

Lightweight StonePly panels offer a resilient, flexible, and inherently safer cladding material than common stone cladding. In a seismic event, the building deflects as the ground shifts. Lightweight and ductile, StonePly natural stone panels are inherently better able to move with the structure than heavy, brittle solid stone panels.

Traditional Stone Cladding in an Earthquake

The problems with common stone cladding systems and earthquakes are:

  • Coming in at over 27 pounds per square foot, common stone cladding is heavy, creating additional strain on the building structure in a seismic event
  • Crumbling solid stone cladding can be lethal when it falls even a few feet
  • Inherently brittle stone cladding generally relies on a groove cut at the edge of the stone and anchors, leaving only thin tabs of stone at the edges as the sole resistance to the powerful shockwaves of a tectonic plate

With non-structural components like stone cladding, the main emphasis of seismic design is on saving lives by reducing the hazard of falling debris. The common method of attaching a stone façade or cladding is with 1 3/4" to 3" stone slabs and stainless steel anchors set into "kerfs" or grooves in the stone edges. That leaves a thin tab of stone to attach the cladding to the structure. Since common stone cladding is inherently brittle, movements in the supporting structure can lead to the kerfs breaking or the stone becoming dislocated and falling.

The seismic design of common stone cladding systems relies mostly on attempting to isolate the rigid brittle stone from the movements of the other stones and the structure. Unfortunately, earthquakes in the recent past in the United States have shown the vulnerability of this design. There have been several instances of cladding becoming cracked or dislodged and crashing to the ground. A falling piece from a solid stone, 1 3/4" panel, as is used in common stone cladding, can be lethal even from a drop of a few feet.

In addition to the life safety hazards, earthquake damage to building cladding can be expensive. The 1994 Northridge earthquake caused an estimated $1.1 billion in damage to building envelope wall systems alone.

The Solution for Stone Cladding in Earthquake Zones

United States Map of Earthquake Risk

USA Earthquake Hazard Map

StonePly stone panels confer many advantages when it comes to designing for seismic activity:

  • Low weight (3.3 lbs. per sq. ft.) means smaller load on the structure
  • Every square inch of the stone is permanently bonded to an aluminum substrate with a bond strength of over 50,000 pounds per square foot
  • Flexible, ductile panels hold the stone fast as the seismic waves move throughout the structure

The aluminum honeycomb and epoxy lamination techniques were developed during our work with the United States government. StonePly stone panels use the same technology used on military and commercial jet aircraft to withstand intense vibration, deflection, and impacts day after day. These laminates are designed to survive forces a building could never be expected to, including twisting and vibration far more intense than any earthquake ever recorded, for thousands of hours.