| Other Names | Kuppam White Granite, Gray Wave Granite, New Viscon White Granite | |
|---|---|---|
| Availability | Inquire | |
| Finishes | Polished, Honed, Sawn, Rockfaced, Sandblasted, Tumbled, Acid Wash, Antique | |
| Country of Origin | India | |
| Abrasion Resistance | Excellent | |
| Chemical Resistance | Good | |
| Durability | Excellent | |
| Fire Performance | 0 flame spread (per ASTM E 84) | |
| Freeze Thaw Resistance | Good | |
| Hardness | Excellent | |
| Panel Sizes | Up to 4'×8' (1220mm×2440mm) | |
| Staining Resistance | Good | |
| Structural Performance (on Honeycomb) | Excellent |
Gray Mist Granite Panels by StonePly
Gray Mist Granite presents a layered composition of soft gray, charcoal, and off-white tones moving in fluid, wave-like bands. The pattern alternates between tight linear striations and broader sweeping movement, creating a surface that feels both controlled and expressive. Fine mineral speckling within lighter areas introduces texture, while darker bands provide contrast and depth without disrupting the overall balance.
Continuity becomes the defining move when this material is brought into the composition, allowing exterior surfaces to read as extended, uninterrupted planes where the banding reinforces proportion and direction. Interior conditions may carry that same intent into vertical cladding within open volumes or transitional spaces, where the movement within the stone adds visual cadence without becoming dominant.
Within the StonePly system, a thin layer of stone is bonded to an aluminum honeycomb backing, allowing Gray Mist Granite to be produced with a consistent thickness while reducing overall weight. This fabrication supports its use in panelized cladding where alignment, detailing, and integration with adjacent systems are carefully considered, while maintaining the natural flow of the stone.
For additional information regarding finishes, panel configurations, or technical resources related to Gray Mist Granite, please contact StonePly for more information.
Additional Reading
Other than diamonds, rubies, and sapphires, granite is the hardest natural stone. Granite is the preferred stone for exterior cladding as it is known for its strength and resistance to the elements. Unlike marble, granite is a very low maintenance choice for your building exterior; it is extremely resistant to heat, scratching, and stains.
Quarried all over the world, granite comes in a wide variety of colors. Typically you find granite finished with a high polish to show off the beautiful array of colors and natural grain. Granite's appearance is phenomenal for exterior applications or interior accents but can sometimes look too "busy" in confined spaces. To meet the need of current trends, granite can be honed, sandblasted, or have other textures applied to soften its natural tones and provide a very aesthetically pleasing panel.
Granite is not only found in commercial cladding applications but is a favorite for counter tops and flooring as well. The stone is extremely durable and easily maintained and cleaned. Being harder than marble and limestone, granite surpasses other stones in its ability to resist staining and acidic materials.
If your requirements call for a stone that has permanence, enduring texture and color, along with complete freedom from deterioration and maintenance, then granite is an ideal candidate for your project.